Used boxes and gaylords across Nebraska.
10 metros served from our yard in St. Louis, roughly 450 road miles away. Zone 2 — scheduled milk runs. Weekly recurring routes that collect and deliver on the same pass.
Quote for Nebraska
Add your postal code and we will confirm the mode and the transit time.
- Freight zone
- Zone 2
- Distance
- 450 mi
- Quote turnaround
- Same business day
- Typical delivery
- 2 – 4 days
- Collection
- On the weekly route
- Metros covered
- 10
Milk run, partial truckload, drop trailer.
Where the schedule allows, delivery and collection happen on the same pass.
Where we ship in Nebraska.
Each metro has its own page with the lane detail. If yours is not listed, we almost certainly still serve it — the list is the metros we ship to most often, not a boundary.
What moves on this lane
The Midwest is our home market and the densest part of our network. Manufacturing, agriculture and distribution all generate used corrugated here in volume, which means supply and demand sit close together and freight stays short.
Nebraska is a two-way lane for us wherever the schedule lines up: graded stock out, recovered corrugated back. That reverse load is the cheapest freight either side will ever buy and the lowest-carbon mile in the loop.
Industries we supply here
- Manufacturing
- Agriculture
- Retail distribution
- Automotive supply
- Food processing
Grading does not change by distance
This is worth stating plainly, because it is the question we get asked most on long lanes. Every container shipped to Nebraska is graded by hand at the same station, against the same written four-point scale, by the same people. There is no “long-haul grade” and no quiet downgrade to absorb freight cost.
What does change with distance is which mode makes sense, and we quote that honestly — including the cases where we think you should buy locally instead.
- Buying graded stock — Used and reconditioned containers photographed before you commit, quoted delivered.
- Selling us your boxes — Send a photograph of the stack. We price by grade and volume and pay on pickup.
- Recycling & baling — Mill-spec #11 and #12 OCC with moisture control and contamination logging.
- Reconditioning — Flap splices, patch panels, re-scoring and re-facing at our bench, then re-graded.
- Freight & logistics — Knocked down, banded and cube-checked so you are not paying to move air.
- Box management — A managed container pool held under your name, collected, graded and re-issued.
Work the numbers first
Box Studio gives you the cube, the pallet fit and the trailer count for any size, which is the information that actually decides your delivered price on this lane.
Bulk containers shipped into Nebraska.
Inventory turns constantly, so treat this as the shape of what we hold rather than a live list. Ask and we will tell you what is on the floor today.
| Size | Dimensions | Wall | Capacity | Cube | Typical use |
|---|---|---|---|---|---|
| Tall-standard 48 | 48" × 40" × 39" | Triple wall | 1,900 lb | 43.3 ft³ | Mixed distribution bulk |
| Column 48 | 48" × 40" × 52" | Triple wall + corner posts | 2,000 lb | 57.8 ft³ | Light, high-cube consolidation |
| Low-side 48 | 48" × 40" × 30" | Triple wall | 1,600 – 2,000 lb | 33.3 ft³ | Dense scrap, metal turnings |
| Tall 48 | 48" × 40" × 44" | Triple wall | 1,800 – 2,200 lb | 48.9 ft³ | Textiles, foam, light bulk |
| Extra-tall 48 | 48" × 40" × 48" | Triple wall | 2,000 – 2,400 lb | 53.3 ft³ | Returns processing, apparel |
| Octabin 41 | 41" × 41" × 38" | Triple wall (8-sided) | 2,400 lb | 36.9 ft³ | Dense granulate, minerals |
The same four grades, whether you are in St. Louis or 1,900 miles away.
| Grade | Means | Condition | Typically used for |
|---|---|---|---|
| A | Like new | Used once, no print bleed-through, square corners, no scuffing on flaps. Often a single-trip freight box or an over-run that never shipped. | Direct resale, retail-facing, export |
| B | Good, light wear | Minor surface scuffs, light creasing on one panel, clean interior. All flaps intact and fully functional. | Internal logistics, bulk shipping, storage |
| C | Usable, visible wear | Visible creasing, labels or tape residue, possible small tears away from load-bearing edges. Still holds a stack. | Scrap collection, in-plant totes, one-way moves |
| D | Recovery only | Delaminated, crushed flutes or moisture-stained. We bale these as OCC rather than resell them. | Baled OCC → paper mill |
Shipping to Nebraska.
What is the minimum order for Nebraska?
One pallet for gaylords — typically 20 to 24 knocked down — or 250 shippers. On this lane the freight is short enough that small orders still make sense.
How long does delivery take?
Quote within same business day, delivery typically 2 – 4 days once released. Modes available on this lane: milk run, partial truckload, drop trailer.
Will you collect used boxes from Nebraska?
Yes, on our own equipment, often as a backhaul on a trailer that was returning empty anyway. Send a photograph of the stack and a rough count.
Do you offer a managed container pool here?
Yes. Pool stock is held under your name in our yard, collected, graded within 24 hours of arrival, repaired at the bench and re-issued against your releases. In Nebraska that usually runs on a monthly or quarterly cadence depending on your cycle time.
Can we visit before committing?
Customers are welcome on the grading floor Monday to Thursday, 9:00 AM to 3:00 PM Central. Bring safety shoes. If a visit is impractical at this distance, we photograph every lot before you commit instead.
Is used board suitable for food contact here?
No used corrugated container is suitable for direct food contact, in any state. Lined containers with FDA-compliant poly or foil liners are standard across produce and ingredients, and we supply the liners with supplier letters of guarantee.
Six things move the number, and volume is only the fourth.
Used box pricing confuses people because the obvious lever — how many you want — is among the weakest of the six. Spread is the gap between best and worst case on our own quote data.
| Factor | Spread | Why |
|---|---|---|
| Destination lane | 2.8× | Within-Midwest versus a long nationwide haul |
| Size-run consistency | 2.1× | A single matched size versus genuinely mixed sizes |
| Grade | 1.9× | Grade C versus grade A on the same size |
| Order volume | 1.3× | One pallet versus a full truckload, same lane and grade |
| Timing flexibility | 1.15× | Take-it-when-it-lands versus a fixed delivery date |
| Season | 1.1× | March versus October on the same lane |
What actually fits in the truck.
Every cube figure we quote is calculated against these, at a realistic 72% packing efficiency rather than a theoretical 100%.
| Unit | Inside dimensions | Volume | Pallet positions | Payload | Note |
|---|---|---|---|---|---|
| 53' dry van | 630" × 100" × 110" | 3,489 ft³ | 26 | 45,000 lb | Our standard outbound unit |
| 48' dry van | 576" × 99" × 108" | 3,100 ft³ | 24 | 44,000 lb | Older fleet, still common on LTL |
| 28' pup | 330" × 100" × 108" | 1,750 ft³ | 12 | 22,000 lb | LTL linehaul segment |
| 26' straight truck | 306" × 96" × 96" | 1,700 ft³ | 12 | 10,000 lb | Liftgate deliveries to sites without docks |
| 40' container | 474" × 92" × 94" | 2,390 ft³ | 20 | 59,000 lb | Export; corrugated avoids ISPM 15 |
| 40' high cube | 474" × 92" × 106" | 2,694 ft³ | 20 | 58,000 lb | Preferred for low-density freight |
Ten conversions we use every day.
None of these are difficult. All of them are regularly got wrong, usually by a factor of 1,728.
| From | To | Factor | Worked example |
|---|---|---|---|
| Cubic inches | Cubic feet | ÷ 1,728 | 48 × 40 × 36 = 69,120 in³ = 40.0 ft³ |
| Square inches | Square feet | ÷ 144 | 13,528 in² = 93.9 ft² |
| Pounds per ft² | Board weight | × area in ft² | 93.9 ft² × 0.55 = 51.7 lb |
| Pounds | Kilograms | × 0.45359 | 51.7 lb = 23.5 kg |
| Inches | Millimetres | × 25.4 | 48" = 1,219 mm |
| Cubic feet | Cubic metres | × 0.02832 | 40.0 ft³ = 1.13 m³ |
| Short tons | Metric tonnes | × 0.90718 | 11,800 tons = 10,705 tonnes |
| Loose OCC volume | Weight | × 80 lb/yd³ | 40 yd³ ≈ 3,200 lb |
| Baled OCC volume | Weight | × 700 lb/yd³ | 2 yd³ bale ≈ 1,400 lb |
| Trailer volume (53') | Usable | × 0.72 | 3,489 ft³ → 2,512 ft³ |
Why empty packaging rates so badly.
LTL pricing keys off density. Knocked-down corrugated weighs almost nothing and occupies a full pallet position, so it lands near the expensive end of a scale designed around weight.
| Class | Density | Typical commodity | Where packaging sits |
|---|---|---|---|
| 50 | 50+ lb/ft³ | Bricks, steel bar | Rarely packaging |
| 55 | 35 – 50 | Hardwood flooring | Dense palletised goods |
| 60 | 30 – 35 | Car accessories | Heavy cartoned goods |
| 65 | 22.5 – 30 | Bottled beverages | Full case packs |
| 70 | 15 – 22.5 | Food in cartons | Typical dense distribution |
| 85 | 12 – 15 | Crated machinery | Palletised assemblies |
| 92.5 | 10.5 – 12 | Computers, monitors | Cushioned electronics |
| 100 | 9 – 10.5 | Boat covers, canvas | Light bulky goods |
| 125 | 7 – 8 | Small appliances | Void-filled cartons |
| 150 | 6 – 7 | Auto sheet metal | Erected boxes start here |
| 175 | 5 – 6 | Clothing, couches | Knocked-down heavy board |
| 200 | 4 – 5 | Aircraft parts | Knocked-down double wall |
| 250 | 3 – 4 | Mattresses, plasma TVs | Knocked-down single wall |
| 300 | 2 – 3 | Wood cabinets, tables | Erected gaylords |
| 400 | 1 – 2 | Deer antlers | Erected light bulk |
| 500 | < 1 | Gold dust, ping-pong balls | Loose void fill |
Note the two rows that matter here: knocked-down board is class 150 – 250, erected containers are class 300 – 400. That gap is the entire argument for banding everything flat.
Seven things about your dock that change the quote.
Declared before the quote these are free to plan around. Discovered on delivery day they are the single most common reason a cheap quote becomes an expensive invoice.
| Item | Specification | Why it matters |
|---|---|---|
| Dock height | 48 – 52" typical | Below 44" a standard trailer needs a leveller or a ramp |
| Dock leveller capacity | 20,000 – 30,000 lb | Loaded gaylords on a pallet truck approach the limit |
| Door width | 8 – 9 ft | Double-stacked knocked-down bundles are wide |
| Apron depth | 100 – 130 ft | A 53-foot trailer needs room to square up |
| Liftgate requirement | If no dock | Add $75 – $150; declare it before the quote, not after |
| Receiving window | 3-day window ideal | Lets us consolidate; worth more than a volume discount |
| Forklift availability | 3,000 lb minimum | A loaded gaylord plus pallet exceeds many electric walkies |
How long each thing actually takes.
Measured from a confirmed order, not from the first email. Artwork approval and procurement onboarding sit outside these figures and are usually the real critical path.
| Item | Lead time | Note |
|---|---|---|
| Graded used shippers, stock size | Same week | Often 48 hours on Midwest lanes |
| Graded gaylords, stock size | Same week | Knocked down and banded |
| Reconditioned gaylords | 7 – 10 days | Bench time plus re-grading |
| Lids, liners and accessories | Same week | Ships on the same pallet |
| Recovered pallets, repaired | 3 – 7 days | Depends on repair queue |
| New stock-size boxes | 2 – 5 days | 60+ sizes held in St. Louis |
| New custom die | 10 – 15 working days | Includes die making and first article |
| Printed new board, 1 – 4 colour | 10 – 15 working days | Plate making included |
| Honeycomb panel, stock | 5 days | Pressed from recovered board |
| Die-cut dunnage to profile | 7 – 10 days | Tooling for non-standard profiles adds time |
| Printed retail display | 10 – 12 days | Artwork approval is usually the critical path |
| Baler placement | 2 – 4 weeks | Site survey, delivery and commissioning |